Parts Required To Install The Mount On Concrete; Tools Required To Install The Mount On Concrete - Hughes DiRECWAY HNS 1035930-0001 Site Preparation Manual

Chapter 4 • Installing mounts
64
1035678-0001 DRAFT Revision 1.04
Table 8 lists the parts required to install the mount on concrete.
Table 8: Parts required to install the mount on concrete
Item
Hilti sleeve anchors
Table 9 lists the tools required to install the mount on concrete
Table 9: Tools required to install the mount on concrete
Tool
Ladder
Carpenter's level
Pencil Carpenter's
Tape measure 25'
Hammer
Drill 3/8-inch electric
Masonry drill bits 3/8-inch (and 1/4-inch if needed)
Wrench 9/16 and 1/2-inch or adjustable (1/4-inch if
needed)
Torque wrench 7/16, 9/16, and 1/2-inch socket and capable of
torquing to 18 ft-lbs
Blow out air bulb
Type
3/8-inch x 3-inch
Type
Quantity
4