Table of Contents
Advertisement
Radiation Hazard
Caution Signs and
Labels
Installing the antenna
mount
CAUTION
• Install the satellite antenna mount only as described in
this manual.
• Only HNS-Certified installers can install DIRECWAY-SP
Earth Stations.
• All installations of any type or size will carry industry
standard and government approved Radiation Hazard
Caution Labels on the feed arm.
CAUTION
• All Radiation Hazard Caution signs and labels provided
by HNS for use during installation are compliant with
ANSI/IEEE C95.2-1999. Any additional signs used during
the installation that are not provided by HNS must also
be in compliance with ANSI/IEEE C95.2-1999.
• The Signal Word as defined in Section 3.4 of ANSI/IEEE
C95.2-1999 in any replacement signs shall be
"CAUTION".
• The RF Energy Advisory Symbol as defined in Section
3.5.2 of ANSI/IEEE C95.2-1999 shall be used on all
replacement signs and labels.
• All text on any signs and labels shall be in at least
English and Spanish for terminals installed in the United
States. For earth stations installed in countries other
that the United States national regulations may require
that caution signs in the national language(s) are
additionally posted (e.g. French in Canada and
Portuguese in Brazil).
This chapter describes how to install .98 m and 1.2 m antenna
mounts. Detailed instructions for assembling the antennas are in
the installation manual for that antenna. See Table 3 for the
manuals' part numbers.
Table 3: Antenna manual part numbers (PN)
Antenna type or size
.98 m
1.2 m
Manual part number or
document number
1035930-0001
1035931-0001
Chapter 4 • Installing mounts
1035678-0001 DRAFT Revision 1.04
27
Advertisement
Table of Contents
