Table of Contents
Advertisement
Mounting options Chapter 4 describes the mounts that can be used with various
Safety considerations Safety considerations affect the feasibility of using the
Chapter 3 • Site survey
20
1035678-0001 DRAFT Revision 1.04
antenna sizes. The metal pole mount is secured in a hole in the
ground with concrete. The nonpenetrating mount can be used on
flat roofs or level ground surfaces. The .98 m trimast option can
be used on pitched and flat wood framed roofs, wooden and
masonry walls, and with a standard nonpenetrating mount.
Review the specifications and mount installation instructions for
the type of mount you plan to use. The antenna installation site
must conform to those specifications and be installed according
to those instructions.
installation site. Observe all the safety cautions in this section
when determining if it is feasible to install the antenna at the
candidate site. In addition, consider all safety cautions that
accompany the specific instructions for any antenna mount
installation instructions in later sections.
Advertisement
Table of Contents
