Fax - Kyocera ECOSYS MA4500fx Operation Manual

Setup and Registration (System Menu) > System Menu
Item
DigitalSignature
DigitalSignature
Format
Password Confirm
Password
E-mail Settings
Sender Address
*1 Only on products with the fax function installed.
*2 Non-display; when the S/MIME is Off.
*3 Also applies when sending the fax.

FAX

[System Menu/Counter] key > [ ] [ ] key > [FAX] > [OK] key
Configure settings for FAX.
FAX Operation Guide
-
Select whether to add a digital signature.
Value:
Off: Does not add a digital signature.
Specify Each Job: Whether to add a digital signature is selected each time of
sending.
On: Always adds a digital signature when sending.
Select an algorithm used for encryption of digital signature.
Value: SHA1, SHA-256, SHA-384, SHA-512
NOTE
This function is displayed when "Digital Signature" is set to [Specify Each Job] or
[On].
Select whether to confirm password when setting digital signature.
Value: On, Off
NOTE
This function is displayed when "Digital Signature" is set to [Specify Each Job].
Set a password required for setting digital signature. Enter a new security password 6
to 16 alphanumeric characters and symbols.
NOTE
This function is displayed when "Password Confirm" is set to [On].
-
Specify the sender address for when the machine sends E-mails.
Non-delivery report may be sent back to the sender address specified here. It is
recommended that you specify an e-mail address that can be received by the device
administrator. The sender address must be entered correctly for SMTP authentication.
Value: number between 0 and 300
8-47
Description