Sending Document To Folder On An Ftp Server (Scan To Ftp) - Kyocera ECOSYS MA4500fx Operation Manual

Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
Sending Document to Folder on an FTP Server
(Scan to FTP)
You can store the scanned document into the desired shared folder on a computer.
NOTE
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (page 8-21)
• Before sending a document, configure the FTP Client (Transmission) .
ProtocolSettings (page 8-14)
1
Select the [Send] key.
2
Place the originals.
Loading Originals (page 5-2)
3
In the basic screen for sending, select
4
Enter the destination information.
The table below explains the items to be entered. Enter the information for each item and select the [OK] key.
Item
Host Name (FTP)
*2
Path
Login User Name
Login Password
*1 If you specify a port number other than the default (21), use the "Host name: port number" (Example: FTPhost-
name:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
*2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the slash "/" not us-
ing the back-slash.
*1
Host name or IP address of FTP server
Path to the receiving folder
For example: User\ScanData
Otherwise the data will be saved in the home directory.
FTP server login user name
FTP server login password
(Case sensitive.)
key> [Folder(FTP)] > [OK] key
[ ] [ ]
Data to be entered
5-17
Max. charac-
ters
Up to
64 characters
Up to
128 characters
Up to
64 characters
Up to
64 characters