Kyocera ECOSYS MA4500fx Operation Manual page 293

Setup and Registration (System Menu) > System Menu
Admin Rpt Set.
[System Menu/Counter] key > [ ] [ ] key > [Report] > [OK] key > [ ] [ ] key > [Admin Rpt Set.] > [OK] key
Configure settings for fax functions.
FAX Operation Guide
Result Rpt Set.
[System Menu/Counter] key > [ ] [ ] key > [Report] > [OK] key > [ ] [ ] key > [Result Rpt Set.] > [OK] key
Item
Send Result
E-mail/Folder
*1
FAX
Attached NW FAX
CancelBeforeSend
*2
Dest. Info.
*1
FAX RX Result
JobFinish Notice
*1 Only on products with the fax function installed.
*2 When "E-mail/Folder" and "FAX" are set to [Off], this function will not be displayed.
Job Log History
[System Menu/Counter] key > [ ] [ ] key > [Report] > [OK] key > [ ] [ ] key > [Job Log History] > [OK] key
Item
Auto Sending
Send History
Destination
Subject
SSFC Log Subject
Personal Info.
Automatically print a report of transmission result when a transmission is complete.
Automatically print a report of transmission result when E-mail or SMB/FTP transmission
is complete.
Value: Off, On, Error Only
FAX Operation Guide
FAX Operation Guide
*2
Print a send result report if the job is canceled before being sent.
Value: Off, On
Select the Recipient Format for the send result report.
Value: Dest. or Name, Dest. and Name
FAX Operation Guide
Attaches sent images to job finish notices.
Value: Do Not Attach Image, Attach SendImage
This function automatically sends the log history to the specified destinations whenever a
set number of jobs has been logged.
Value: Off, On
NOTE
If [On] is selected, specify the number of job histories. The setting range is 1 to 16.
You can also send the log history to the specified destinations manually.
Set the destination to which log histories are sent. Only E-mail address can be set.
Set the subject automatically entered when sending log histories by E-mail.
Value: Up to 60 characters
Enter the subject of the printed job history with ID card authentication.
Value: Up to 60 characters
Select whether to include personal information in the job log.
Value: Include, Exclude
Description
Description
8-7