Setting Wia Driver - Kyocera ECOSYS MA4500fx Operation Manual

Installing and Setting up the Machine > Installing Software

Setting WIA Driver

Register this machine to the WIA Driver. Instructions are based on interface elements as they appear in Windows 10.
1
Display the screen.
1 Click Search box in taskbar, and enter "View scanners and cameras" in the search box. Select [View
scanners and cameras] in the search list then the Scanners and Cameras screen appears.
NOTE
In Windows 8.1, click [Search] in charms, and enter "View scanners and cameras" in the search box. Select
[View scanners and cameras] in the search list then the Scanners and Cameras screen appears.
2 Select the same name as this machine from WIA Drivers, and click [Properties].
2
Configure WIA Driver.
1 Click the [Settings] tab.
2 Enter the machine IP addresses or host name.
3 When using SSL, select the checkbox beside SSL.
4 Set units of measurement.
5 Click [OK].
2-44