Table of Contents
Advertisement
SYSTEM SETUP
The procedure described below let you determine the sys-
tem designation and display the system status.
WJ-FS616C SETUP MENU
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2
SYSTEM SETUP *
CAM DOWNLOAD
CAM UPLOAD
ALL RESET SELECT *
1. Move the cursor to SYSTEM SETUP in the SETUP
MENU and then press the [HOME/SET button.
The SYSTEM SETUP menu as shown in the figure
appears on the monitor screen.
CLOCK SETUP
CLOCK POSITION *
TITLE SETUP *
TITLE POSITION *
SEQUENCE SETUP SEQ1 *
SEQ TIMING-MLT INT(TIME-ADJ)
SEQ TIMING-SPT INT
LOCK MODE
CABLE COMP/VD2/DATA SETUP *
ALM TERMINAL SETUP *
PLAYBACK MODE
DATA MODE
RS-232C MODE
COM PORT SETUP *
VCR IN SELECT
DAISY MODE
UNIT ADDR.SET
PASSWORD
2. Press the [FUNCTION] button to display the next page
of the menu. Press this button again to return to the pre-
vious page of the menu.
36
REC OUTPUT *
NO
NO
SYSTEM SETUP
1 OF 2
JAN 1.97
0:00
ALL
SYSTEM SETUP
2 OF 2
FIELD
CU
VCR
VIDEO
OFF
1
OFF
Clock Setup
This item lets you set the current time and date.
1. Move the cursor to CLOCK SETUP in the SYSTEM
SETUP menu and then press the [HOME/SET] button.
The cursor moves to the right editing area.
2. Select the month by pressing the A or B button.
3. Move the cursor to the right by pressing the C or D
button, then select the date by pressing the A or B
button.
4. Select the last 2 digits for the year and time (military
time) as similarly by pressing the C or D button and
the A or B button.
5. After completing the setting, press the [SET UP/ESC]
button to move the cursor to CLOCK SETUP.
The selected time and date are updated when the [SET
UP/ESC] button is pressed.
Clock Display Position
This item lets you select the position where the clock will be
displayed on the monitor screen.
1. Move the cursor to CLOCK POSITION in the SYSTEM
SETUP menu and then press the [HOME/SET] button.
The position setting menu shown in the figure appears
on the monitor screen.
DEC11.96 12:00:00
CAMTITLE
2. Move the clock position by pressing the C, D, A or B
button.
Note: In the multiscreen display with the multiscreen
output or record output, the clock display is shifted
one line from the preset position if the camera title
and the clock are preset to the same position.
3. Press the [SET UP/ESC] button to execute the selection
and return to the previous SYSTEM SETUP menu.
Advertisement
Table of Contents
