Carriage Belt Replacement - Roland VersaEXPRESS RF-640 Service Notes

3-11 CARRIAGE BELT REPLACEMENT

!! IMPORTANT !!
When replacing the Carriage Belt, make sure to connect the new belt to the current belt, and pass the new belt
at the same time as removing the current belt.
When it is not this way, there is a possibility that the new belt can not be attached.
For further detail of the procedure, refer to #11- 12.
Turn off the Sub Power SW, and then turn off the Main Power
1
SW.
Remove the Covers.
2
Front Cover
Right Cover
Left Cover
Front Rail Cover
Top Cover
Right Top Cover
Move the Head Carriage leftwards to the position where it is
3
not above the Capping Unit.
OFF
Left Cover
Front Cover
3-65
Front Rail Cover
Top Cover
Right Top Cover
Right Cover