Ink Tube Replacement - Roland VersaEXPRESS RF-640 Service Notes

3-17 INK TUBE REPLACEMENT

Before replacing the Ink Tubes, refer to the following fi gure to make sure which color connects which tube.
Turn on the Sub Power SW while pressing the left, right and
1
down keys to enter the Service Mode.
Revised 17
In case of replacing all the ink lines:
2
Select [SERVICE MENU]>[SUB MENU]>[PUMP UP], and take
out the ink in the Ink Tube by following the messages on the
LCD panel. It takes about 20 minutes to fi nish [PUMP UP].
In case of replacing only a specifi c ink line:
Select [SERVICE MENU]>[SUB MENU]>[SELECT PUMPUP],
and select an ink line you want to remove ink from.
The time required for [SELECT PUMP] is:
- Approx. 10 minutes if only one ink line color is selected
- Approx. 20 minutes if two or more ink line colors are
selected
Top
No.3
No.5
No.4
No.8
No.7
No.1
No.6
No.2
Bottom
Tube Guide
Top
No.2
No.3
No.4
No.1
Bottom
Tube Guide
MENU
SERVICE MENU
In case of replacing all the ink lines :
SERVICE MENU
SUB MENU
[ ]
SUB MENU
PUMP UP
[ ]
EMPTY
DRAIN BOTTLE
ENTER
REMOVE SOL CTR.
12345678
PUMPING-UP
>>>>>
3-86
Revised 2
+
MENU
In case of replacing only a specifi c ink line :
SERVICE MENU
SUB MENU
[ ] [ ]
SUB MENU
SELECT PUMPUP
[ ]
EMPTY
DRAIN BOTTLE
REMOVE SOL CTR.
12345678
PUMPING-UP
>>>>>
[ ]
ENTER