Cleaning the Machine
Cleaning the Cutting Carriage Roller
Paper dust affixes to the separating knife carriage roller during media separation. Periodically wipe the
area clean.
WARNING
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause a fire.
CAUTION
Before attempting cleaning, switch off the sub power and wait until the UV-LED device cools (ap-
proximately 15 minutes).
Sudden movement of the machine may cause injury, or hot components may cause burns.
IMPORTANT
• This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
• Never attempt to oil or lubricate the machine.
Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
228
Regular Maintenance