Carriage Belt Replacement - Roland SOLJET PRO III XJ-540 Service Notes

3-9 CARRIAGE BELT REPLACEMENT

Turn off the Sub Power SW, and then turn off the Main
1
Power SW.
Remove the following covers.
2
Right I/S Cover
Top Cover
Right Top Cover
Front Rail Cover
Front Cover
Panel Cover
Left I/S Cover (XJ-740 only)
Flexible Cable is connected to the Panel
Board. Do not disconnect the Flexible Cable.
After turning on the Main Power SW, turn on the Sub
3
Power SW while pressing the Left, Right and Down keys
to enter the Service Mode.
To protect the Heads, select [I/S MENU] > [I/S
4
CONTROL] > [CAP] > [OPEN]. And press the [ENTER]
key to move down the Capping Unit.
Main Power SW
< Rear view >
Front Rail Cover
Left I/S Cover
Front Cover
MENU
SERVICE MENU
SERVICE MENU
I/S MENU
I/S MENU
I/S CONTROL
I/S CONTROL
CAP
CAP
OPEN
3-51
Top Cover
Right Top Cover
Right I/S Cover
Panel Cover
+
MENU
[ ] [ ]
[ ]
[ ]