Roland VersaEXPRESS RF-640 Service Notes page 191

Other Factory Mode
ENTER
INITIALIZE ALL
SYS.PARAMETER
SELECT MODEL
RF-640
INITIALIZATION
COMPLETED
LANGUAGE / UNIT
SELECTION
+
MENU
Roland DG Corp.
RF-640
MENU LANGUAGE
ENGLISH
LENGTH UNIT
mm > INCH
TEMP. UNIT
C > F
SYSTEM PARAMETER INITIALIZE
+
[ ]
[ ]
[ ]
[ ]
All parameters will be initialized. Turn on the Sub Power SW
while pressing [ ], [
machine in system parameter initialize mode.
Select the model by pressing [
Press [ENTER] key to initialize the system parameter or
press the Sub Power SW for more than 1 second to cancel it.
The machine turns off automatically when the initialization is
completed. All the parameters are reset to the default.
It is necessary to initialize the limit position after this
initialization. [SERVICE CALL 0101] occurs without initializing
the limit position.
SERVICE REPORT PRINTING
+
SERVICE REPORT
4-12
] and [ENTER] keys to start the
] and [ ] keys.
Turn on the Sub Power SW while
pressing [ ] key to start the machine
in the service report printing
mode.
The service report will be printed
automatically when the media is set
up. It prints with Black ink.
(Printing Area : W270 L360mm)
The machine turns to be the normal
mode after printing.