Roland VersaEXPRESS RF-640 Service Notes page 234

Assembling and Installing
Set up the followings in reference to the Setup Guide [3.Assembling and Installing] to [7. Network Settings].
Assembling the Stand – Mounting the Machine
Installing the Media Holder
Installing the Drain Bottle
Removing the retainers/Packing Materials
Connecting the Cables
Apply the cleaning liquid to the rubber gasket of the Cap Top with the cleaning stick.
It is necessary to apply the cleaning liquid to the Cap Top before performing the initial FILL INK because the Cap Top
can not keep the air tight in case of the Cap Top is dry.
Installing the Ink Cartridges
Gently shake the ink cartridges before inserting them to the slots.
Cleaning cartridges
(Cleaning the print head: about 40 minutes)
Follow the on-screen instructions to remove and insert the
SOL INK cleaning cartridges. (only for ECO-SOL MAX2）
!! IMPORTANT !!
When the message "EMPTY DRAIN BOTTLE" appears, be sure to discard. If not discarded at this step, the
discharged ink will overfl ow.
Moisten the cleaning stick with the cleaning liquid.
Be sure to use the included cleaning stick.
(ECO-SOL MAX: SL-CL, FPG: CJ-CL)
Apply the cleaning liquid to the rubber gasket of the Cap Top.
(ECO-SOL MAX: SL-CL, FPG: CJ-CL)
（Filling with ink: about 15 minutes）
Follow the on-screen instructions to insert the ink
cartridges.
6-4
Ink Cartridges