How To Fold Ribbon Cable To The Head - Roland VersaEXPRESS RF-640 Service Notes

3-16 HOW TO FOLD RIBBON CABLE TO THE HEAD

These procedures are for connecting the ribbon cables to the Head.
The ribbon cables and their procedures are different from each con-
nector. Refer to the following list and procedures and fold the ribbon
cables.
Connector A : 1000006702 CABLE-CARD,29P1 256L BB HIGH-V
Connector B : 1000006702 CABLE-CARD,29P1 256L BB HIGH-V
Connector C : 1000006703 CABLE-CARD,29P1 276L BBR HIGH-V
<Connector A : 1000006702 CABLE-CARD,29P1 256L BB HIGH-V> <Connector A : 1000006702 CABLE-CARD,29P1 256L BB HIGH-V>
Place the ribbon cable which character side facing up.
1
There is no difference between left and right direc-
tion.
Fold the ribbon cable with 90 degree angle at the 18 +/-5 mm
2
point from the left end.
Fold back the ribbon cable at the 20 +/- 5mm point.
3
18 +/- 5mm
18 +/- 5mm
20 +/- 5mm
Plain side
3-83
A
B
A C
Character side
Character side
18 +/- 5mm
90 degree
Plain side
Character side
18 +/- 5mm
Character side
Plain side
20 +/- 5mm