Data Capture - Konica Minolta bizhub 500 Service Manual

7. Data Capture

7. Data Capture
If any fault is caused in relation with the printer, acquire the print job data for the fault analysis.
Capture data of up to 5 jobs can be saved. When new data is saved, oldest one is deleted.
Caution
To enable this function, following conditions should be met.
• Hard disk should have been installed in the main body printer (copier).
• [Administrator Setting] - [Security Setting] - [Security Details] - [Print Data Capture] should be set
to [Allow].
• [Administrator Setting] - [Network Setting] - [FTP Setting] - [FTP Server] should be set to [ON].
10
Field Service Ver1.0 February.2006
1. Activate the service mode.
• (Refer to the steps 1 through 7 of "ADJUSTMENT
/ SETTING, 5. Starting and Finishing the Service
Mode".)
2. Press [System2] - [Data Capture] and select
[ON]. Selecting [ON] saves the job data transmit-
ted from PC in the copier hard disk.
3.
Confirm the IP address of the copier.
4. Connect the Windows PC and copier with the
Ethernet cable.
5.
Activate the command prompt, specify the IP
address of the copier and activate the FTP.
6.
Enter User and Password.
• User: capture
• Password: sysadm
7.
Display the list of files which can be captured
with the [ls] or [dir] command.