Field Service Ver. 1.0 Feb. 2006
MAINTENANCE
2.
PERIODIC CHECK
2.1
Maintenance procedure
NOTE
• The alcohol described in the cleaning procedure of Maintenance represents the iso-
propyl alcohol.
2.1.1
Replacing the Pick-up Roller and Feed Roller
A. Periodically replaced part/cycle
• Pick-up Roller: Every 500,000 prints (Actual replacement cycle: Every 200,000 faces)
B. Procedure
[1]
[3]
[5]
1. Open the Open/Close Cover [1].
16eaf2c001na
2. Remove two screws [2], and remove the
cover [3].
[2]
16eaf2c002na
3. Remove two C-clips [4], and remove the
Pick-up Roller Assy [5].
[4]
16eaf2c003na
2. PERIODIC CHECK
5