Field Service Ver1.0 Feb.2006
6.3.12
Removing/reinstalling the operation panel
A. Procedure
[5]
[1]
[2]
[3]
[4]
50gaf2c064na
1.
Remove the 4 screw caps [1] and then remove
the 4 screws [2].
2.
Remove the connector [4] of the operation board
(OB) [3] and then remove the operation panel [5].
Note
• When installing the operation panel, be sure
to install the connector [4] without fail.
3.
Reinstall the above parts following the removal
steps in reverse.
6. OTHERS
129