Lift Tray; Conveyance Unit - Konica Minolta bizhub 500 Service Manual

Field Service Ver. 1.0 Feb. 2006
3.3.9

Lift Tray

NOTE
• When removing the Lift Tray, be sure to bring the Tray down to the bottom.
• If the OT is installed, remove it in advance.
[1]
[2]
[4]
[3]
3.3.10

Conveyance Unit

[2]
1. Remove the Front Door.
[1]
(See P.10)
2. Remove the Conveyance Front Cover
/Lt.
(See P.10)
3. Disconnect three connectors [1].
4. Remove two screws [2], and remove the
ground wire.
4349f2c019na 5. Remove the Tray /1, Tray /2 and OT.
(See P.12)
6. Remove six screws [3], and lift the Lift
Tray [4] upward and off from the Con-
veyance Unit.
NOTE
• The removal of the upper 2 screws [3]
[3]
is not available when the Lift Tray is
not brought down to the bottom.
4349f2c020na
1. Remove the Lift Tray.
(See P.13)
2. Remove the Front Door.
(See P.10)
3. While holding down the lock release
button [1], remove the Conveyance Unit
[1]
[2].
4349f2c021na
3. OTHER
13