Stapler Movement Mechanism - Konica Minolta bizhub 500 Service Manual

5. OPERATION
5.5.2

Stapler movement mechanism

• The movement/rotation of the staplers /Fr [4] and /Rr [1] are made by the stapler moving motor (M6) [3].
• The home position is detected by the stapler home sensor (PS14) [2] and the position is decided according
to the drive amount of M6.
• The 1 stapling at the front corner is made by the stapler /Fr, the 1 stapling at the rear corner made by the
stapler /Rr, and the 2 stapling operations are made by the staplers /Fr and /Rr.
[1] Stapler /Rr
[2] PS14
A. Control
• When the FS start signal turns ON, the stapler moving motor (M6) turns ON, and it stops at the stapling
position.
• After completion of the job, the moment the paper exit motor (M3) turns OFF, it returns to the home posi-
tion.
30
[4] [3]
Theory of Operation Ver1.0 Feb.2006
[2] [1]
[3] Stapler moving motor (M6)
[4] Stapler /Fr
4521t2c023na