Field Service Ver. 1.0 Aug. 2006
11.8.8
SECURITY
A. CONFIG
(1) ENABLE
Function
• Selects whether or not the menus are protected with a password.
Use
• To protect all menus with a password.
Setting
• The default setting is OFF.
/procedure
(2) SET PASSWORD
Function
• Sets the password for displaying the menus.
Use
• To set the password for protecting the menus.
NOTE
• The specified password is applied only if [SECURITY] → [CONFIG] →
[ENABLE] is set to [ON].
Setting
1. Select [SET PASSWORD].
/procedure
2. Enter the 8-digit password.
3. Accept the password setting using the Menu Select key.
NOTE
• Default password is set to "SYSADMIN". If changed, limit password to 16 char-
acters.
11.8.9
CAPTURE PRT JOB
Function
• Selects whether or not received print jobs are saved on the hard disk.
Use
• When an error occurs, to help you analyze the cause of the error according to the
print job data.
OFF
ON
PRINT : The received print jobs are printed and saved on the hard disk.
NOTE
This menu item appears only if an optional hard disk is installed.
Setting
• The default setting is OFF.
/procedure
11.8.10
FORMAT
A. FORMAT FLASH
Function
• Selects whether or not to initialize the flash RAM.
Use
• To initialize the flash RAM.
Setting
• The default setting is NO.
/procedure
If YES is selected, the flash RAM is initialized.
11. MENU (magicolor 2550/magicolor 2550DN)
"OFF"
: The print jobs are not saved on the hard disk.
: The received print jobs are saved on the hard disk without being printed.
"OFF"
"NO"
ON
ON
PRINT
YES
119