Ipx Commands; Table 10-12. Ipx Commands - Nortel BayStack 820 Installation And Reference Manual

IPX Commands

These commands configure IPX settings for the router.
Table 10-12
Table 10-12.
Command
add ipx route <destination_netnumber> <interface_name> <hop_count,
1-15>
add ipx route <destination_netnumber> lan <gateway_MACaddr>
<hop_count, 1-15>
+add ipx sap
delete ipx <interface_name>
delete ipx default route
delete ipx route <destination_netnumber>
delete ipx <interface_name>
disable spoofing <profile_name> [ipxrip | ipxwatchdog]
enable spoofing <profile_name> [ipxrip]
enable spoofing <profile_name> [ipxwatchdog] <1-60>
ipxping <remote_network_#> <remote_MACaddr> <repeat_count>
set ipx default route <interface_name>
set ipx default route lan <MACaddr>
set ipx rip <interface_name> {disabled | enabled}
set ipx <profile_name>
set ipx <profile_name> <network_#>
set ipx lan
set ipx lan <local_network_#>
set ipx lan <local_network_#> {802.2 | 802.3 | Ethernet_II/snap}
show ipx <interface_name>
show ipx routing table
show ipx sap table
show ipx statistics
206901-A
lists the IPX commands.
IPX Commands
Using the Command Line Interface
Page
10-36
10-36
10-37
10-38
10-38
10-38
10-38
10-38
10-38
10-38
10-39
10-39
10-39
10-39
10-39
10-39
10-40
10-40
10-40
10-40
10-41
10-41
10-43
10-35