Set System Name <"System_Name; Set Time <Hh:mm:ss; Set Timezone <-12 - +12; Show Config - Nortel BayStack 820 Installation And Reference Manual

Installation and Reference for the BayStack 820 ISDN Router
set system name <"system_name">
Sets the router name. This information is displayed when you execute the
system
in the BayStack 820 ISDN Router Manager software. You can enter up to 30
characters.
Example
BayStack> set system name "BayStack 820 Router"
set time <hh:mm:ss>
Sets the time of the day (24-hour clock) for the router. The time is also set
automatically when you connect to the router through the BayStack 820 ISDN
Router Manager software.
Example
BayStack>
set timezone <-12 - +12>
Specifies the time zone for the router location as an offset from Greenwich Mean
Time (GMT). The time zone is set automatically when you connect to the router
through the BayStack 820 ISDN Router Manager software.
Example
BayStack> set timezone -8
Time Zone is set to GMT-8 hours.

show config

Displays a concise summary of the router configuration.
Example
BayStack> show config
IP Addr: 192.168.168.201
Port 1: ISDN
Directory#1: 11
isp
56/64KDial Only
Send/Recv Auth: E/N
Port 2: Type None
10-66
command (page 10-68), as well as in the System Information dialog box
set time 20:33:00
NetMask: 255.255.255.0
PPP ENABLED
Directory#2: 22
: DN: 4085553333 remote name:
CLID: NO
ML: Overflow, Use dial number:
IP/IPX RIP: A/A
Auto
Callback: NO
show
206901-A