Clear Profile Statistics; Clear Profile Statistics <Profile_Name; Connect Profile <Profile_Name; Delete Profile <Profile_Name - Nortel BayStack 820 Installation And Reference Manual

clear profile statistics

Resets the statistics fields in all configured static profiles to their original values.
clear profile statistics <profile_name>
Resets the statistics fields for the specified static profile to their original values. If
you do not specify a profile name, all profile statistics are cleared.
connect profile <profile_name>
Activates the specified switched profile as if a trigger occurred. This command
has no effect on leased-line profiles.
delete profile <profile_name>
Deletes the specified profile.
disable profile <profile_name>
Disables the administrative state of the specified profile. To use a profile, you
must enable it. For details, refer to
disconnect profile <profile_name>
Terminates the connection of an active switched profile as if an idle timeout
occurred. This command has no effect on leased-line profiles.
enable profile <profile_name>
Enables the administrative state of the specified profile. Only enabled profiles are
used by the router. When you create a profile, it is automatically enabled.
206901-A
Using the Command Line Interface
enable profile <profile_name> below.
10-51