Configuring Multilink Options For Dial-In Access; Figure 5-5. Connection Profile Configuration, Single User Dial-In By Isdn Multilink) Dialog Box - Nortel BayStack 820 Installation And Reference Manual

Installation and Reference for the BayStack 820 ISDN Router

Configuring Multilink Options for Dial-In Access

Configure Multilink options if you require advanced configuration for the
operation on the ISDN line and its loadsharing capabilities.
Note: The use of multiple B channels depends on the device and capabilities
of the dial-in user's ISDN subscription. Using an additional B channel may
mean additional cost. If the same phone number is used for both channels,
make sure that the ISDN subscription specifies a hunt group for the two ISDN
B channels.
To configure Multilink options for dial-in access:
In the Connection Profile Configuration, Single User Dial-in by ISDN
1.
Screen (Advanced) dialog box
The Connection Profile Configuration, Single User Dial-in by ISDN
(Multilink) dialog box
Figure 5-5.
5-6
(Figure
(Figure 5-5)
Connection Profile Configuration, Single User Dial-in by
ISDN (Multilink) Dialog Box
5-4), click Multilink.
opens.
206901-A