Placing And Receiving Voice Phone Calls; Placing A Voice Call - Nortel BayStack 820 Installation And Reference Manual

Installation and Reference for the BayStack 820 ISDN Router
Using the information in
3.
then click APPLY.
Table 7-2. SpeedDial Table Entry Configuration, SpeedDial Telephone Access Fields
Field
SpeedDial Number
Name
Remote Phone
Number
Remote Phone Ext.

Placing and Receiving Voice Phone Calls

A telephone, answering machine, or fax machine connected to the router operates
in the same manner as if it were connected to a traditional telephone network.

Placing a Voice Call

After you dial a phone number, extension number, or speed dial number, you must
press the "#" key when you are finished dialing to let the router know that it
should begin dialing the number. If you do not press #, the router begins dialing
after three seconds.
Note: The router begins dialing after a three-second interval.
To place a voice call through the router:
Pick up the handset and wait for the dial tone.
1.
Dial the number followed by the "#" key.
2.
7-6
Description
Enter a 1 to 8 digit number. You cannot enter a speed dial number that begins with
zero.
Enter a name for the speed dial number. The speed dial number is identified by this
name in the directory.
Enter the remote phone number to be dialed.
Enter the remote phone number extension to be dialed.
Table 7-2, configure the speed dial settings and
206901-A