Add Tunnel <Tunnel_Name; Clear Tunnel Statistics; Clear Tunnel Statistics <Tunnel_Name; Delete Tunnel <Tunnel_Name - Nortel BayStack 820 Installation And Reference Manual

+add tunnel <tunnel_name>
Configures a VPN tunnel.
Example
BayStack>>> add tunnel tunnel1
enter action mode (Outgoing, Incoming/Outgoing/Both): Both
enter remote IP Address (0.0.0.0): 209.71.212.6
enter remote name (): SanAntonio
enter remote password ():
enter local name ():local1
enter local password ():

clear tunnel statistics

Clears tunnel statistics for all tunnels.
clear tunnel statistics <tunnel_name>
Clears tunnel statistics for the specified tunnel.
Example
BayStack> clear tunnel statistics tunnel1
delete tunnel <tunnel_name>
Deletes the specified tunnel.
Example
BayStack> delete tunnel tunnel1

show tunnel

Displays a list of all configured VPN tunnels.
Example
BayStack> show tunnel
Name
-----------------------------------------------------------
tunnel1
tunnel2
206901-A
Remote Name Origin
SanAntonio Either
SantaClara Local
Using the Command Line Interface
State IP Addr
Inactive 209.71.212.6
Inactive 120.0.0.1
Elapsed
Time
10-75