Previewing A Brandline Greeting; Deleting A Brandline Greeting; Enabling A Conference-Specific Greeting; Disallowing A Conference-Specific Greeting - Nortel ICB Administrator's Manual

42 Browser User Interface
4 Click Submit.

Previewing a Brandline greeting

1 Select a language and a corresponding .WAV file.
2 Click Play.

Deleting a Brandline greeting

Note: The factory default greeting cannot be deleted.
1 Select a language and a corresponding .WAV file.
2 Click Delete.
3 Click Yes in the confirmation dialog box.

Enabling a conference-specific greeting

Follow the steps below to enable users to create conference-specific
greetings.
1 Select Available in the Conference Greeting panel of the Greeting
2 Enter the maximum length of the greeting, from two to ten seconds.
3 Click Submit.

Disallowing a conference-specific greeting

Follow the steps below to prevent users from creating conference-
specific greetings.
1 Select Not Available in the Conference Greeting panel of the
2 Click Submit.
Standard 01.01 June 2007
Note 2: The Customized Brandline Greeting is not replaced by the
per-conference greeting. The per-conference greeting is played
after the customized brandline greeting.
Settings window. See relevant figure in
window (page 39).
The default is five seconds.
Greeting Settings window. See relevant figure in
Settings window (page 39).
Greetings Settings
Greetings