Figure 3-25. Multilink Trunk Configuration Screen - Nortel 10BASE-T Using Manual

Trunk Trunk Members (Unit/Port)
----- ------------------------------- ------------ --------------- ------------
1 [ 3/6 ][ 3/7
2 [ 4/25 ][ 4/26 ][
3 [ 6/13 ][ 6/14 ][
4 [ 5/19 ][ 5/20 ][
5 [ 8/22 ][ 8/23 ][
6 [ 3/2 ][ 1/2
Trunk Trunk Name
----- ------------------
1 [ U3:T1 to FS2]
2 [ U4:T2 to S2]
3 [ U6:T3 to S2]
4 [ U5:T4 to S3]
5 [ U8:T5 to S4]
6 [ Distributed Trunk]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-25. MultiLink Trunk Configuration Screen
Table 3-22
Table 3-22. MultiLink Trunk Configuration Screen Fields
Field Description
Trunk Column header for the read-only fields in this screen. The read-only data displayed in the
Trunk column indicates the trunk (1 to 6) that corresponds to the switch ports specified in
the user-configurable Trunk Members fields.
Trunk Members The Trunk Members column contains fields in each row that can be configured to create
(Unit/Port) the corresponding trunk. The Unit value in the (Unit/Port) field is configurable only when
the switch (unit) is part of a stack configuration. It indicates that the trunk members in
this row are associated with the specified unit number configured in the Unit field. Each
switch port can only be a member of a single trunk. The appropriate trunk number for
each trunk member configured within this field is shown adjacent to the corresponding
switch port in the Port Configuration screen and the Spanning Tree Configuration screen.
Default
Range
309985-C Rev 00
MultiLink Trunk Configuration
][ 3/9 ][ 3/17 ] [ Normal
/ ][ / ] [ Normal
/ ][ / ] [ Normal
/ ][ / ] [ Normal
/ ][ / ] [ Normal
][ 7/2 ][ 5/6 ] [ Normal
describes the MultiLink Trunk Configuration screen fields.
blank field
1 to 8 or 1 to 28 (depending on model type)
STP Learning Trunk Mode
]
]
]
]
]
]
Press Ctrl-C to return to Main Menu.
Using the Console Interface
Trunk Status
Basic [ Enabled
Basic [ Enabled
Basic [ Enabled
Basic [ Enabled
Basic [ Enabled
Basic [ Disabled ]
(continued)
]
]
]
]
]
3-61