Table of Contents
Advertisement
20 Chapter 1 Management basics
Figure 2 IP Configuration/Setup menu
6
Do one of the following, based on your configuration:
•
7
In the In-Band Subnet Mask field, enter the IP subnet mask address.
8
In the Default Gateway field, enter the default gateway address.
Access levels and passwords
Access to management functions for BayStack 380-24F switches is controlled by
passwords and community strings. Different passwords or community strings
allow access to different levels of management functions. Access to Device
Manager requires entering community strings. Access to the Web-based interface
requires a user identification and a password.
214392-A
For a standalone switch, enter the IP address of the switch in the In-Band
Switch IP Address field.
Note: If the In-Band Subnet Mask field does not already contain a value
when you enter the IP address in the In-Band Switch IP Address field,
the switch software provides an in-use default value for the In-Band
Subnet Mask field, based on the class of the entered IP address.
Advertisement
Table of Contents
