Changes To Remote Annex Server Tools For Windows Nt R3.1; System Requirements; Installing Windows Nt Server Tools; Manually Removing Remote Annex Server Tools For Windows Nt - Bay Networks 5399 Release Note

Remote Access Software Version 5.3 Release Notes
Changes to Remote Annex Server Tools for
Windows NT R3.1
300115-B Rev. A
86

System Requirements

You will need the following to install and run Remote Annex Server Tools
for Windows NT Release 3.1:
• A 486 or greater CPU with a minimum of 32MB of RAM, or
a DEC Alpha CPU with a minimum of 32MB of RAM
• A server running Windows NT Version 4.0, configured to
support TCP/IP
• Administrative privileges on the server
• At least 10MB of free disk space on an NTFS drive
• Four or more formatted 3.5 inch 1.44MB floppy disks, if you
choose to create a set of installation diskettes
• A CD-ROM drive for installation of the software

Installing Windows NT Server Tools

The installation instructions for Windows NT Server Tools state that you
must run the setup.exe file for both Windows NT 3.51 and 4.0. This is
true only for Windows NT 3.51; if you are using Windows NT 4.0, the
seteup.exe file will run automatically.
Manually Removing Remote Annex Server Tools for
Windows NT
Presently, there is no uninstall program included in this release. You will
have to manually remove the program and files if you want to uninstall
them. Use the following procedure to remove the program: