Spr 10137; Spr 10255; Spr 9540; Spr 10434 - Bay Networks 5399 Release Note

Remote Access Software Version 5.3 Release Notes

SPR 10137

The default port mode on all PRI products has changed from cli to
auto_adapt.

SPR 10255

RIP updates should no longer stop on PPP interfaces.

SPR 9540

Annex printing no longer causes the Annex to panic.

SPR 10434

The reset annex all command now correctly updates modem type
definitions in Annex memory, depending on the new list of session
parameter blocks.

SPR 9991

The rip_force_newrt parameter allows you to tune the amount of time
the RAS allows a primary router to send periodic RIP updates. If the RAS
does not hear from the primary router within this timeout period, and a
secondary router broadcasts a valid replacement route, the replacement
route takes precedence regardless of the metric. The default state for this
parameter is 0 (off), which disables the feature. The parameter can be set
for 1 to 255 seconds (the real internal minimum is 5 seconds).
300115-B Rev. A
73