Bay Networks 5399 Release Note page 78

Remote Access Software Version 5.3 Release Notes
300115-B Rev. A
68
Table 12 Disconnect Reason Descriptions (Continued)
Disconnect Reason Success Indication Explanation
pppInitFailed Indeterminate
pppUnknownCode Indeterminate
pppDialback Graceful
pppAddrInuse Unsuccessful
pppNoDevice Unsuccessful
pppModSigHangup Indeterminate
pppSigHangup Forced
pppSigTerm Indeterminate
PPP not configured
properly.
Code not defined for
call management.
Call Disconnect for
purpose of dialback.
Duplicate Address
found in the Annex
Routing of arp table
which is caused by
faulty configuration by
either the user or the
Annex administrator.
Problem with device
during PPP Connection.
This is considered a
fatal internal problem,
which is probably a
major flaw or bug.
The PPP link received a
low level device
disconnect, which
could be from a number
of reasons.
A device reset for the
device associated with
the PPP link.
Another process
associated with PPP
(such as MP) has
requested the link come
down.