Bay Networks 5399 Release Note page 88

Remote Access Software Version 5.3 Release Notes
300115-B Rev. A
78
• IPX dialup addressing is completely rearranged when
address_origin is set to local and the addresses are to be
selected from the WAN; the remote addresses are set to
0.0.0.0. An example of the WAN setup follows (the format of
the screen text has been altered slightly to fit the page):
WAN B/DS0 Channel Parameters
remote_address:
0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
ipx_network:*
a00000ab a00000b7 a00000c3 a00000cf
a00000db a00000e7 a00000f3 a00000ff
a000000b a0000017 a0000023 a000002f
a000003b a0000047 a0000053 a000005f
a000006b a0000077 a0000083 a000008f
a000009b a00000a7
ipx_node:*
00-00-00-00-00-aa 00-00-00-00-01-54 00-00-00-00-01-fe
00-00-00-00-02-a8 00-00-00-00-03-52 00-00-00-00-03-fc
00-00-00-00-04-a6 00-00-00-00-05-50 00-00-00-00-05-fa
00-00-00-00-06-a4 00-00-00-00-07-4e 00-00-00-00-07-f8
00-00-00-00-08-a2 00-00-00-00-09-4c 00-00-00-00-09-f6
00-00-00-00-0a-a0 00-00-00-00-0b-4a 00-00-00-00-0b-f4
00-00-00-00-0c-9e 00-00-00-00-0d-48 00-00-00-00-0d-f2
00-00-00-00-0e-9c 00-00-00-00-0f-46 00-00-00-00-0f-f0
THESE ARE THE NEGOTIATED ADDRESSES:
Options
Network No
Node No
Compression
Routing Prot
Router Name
a00000b3 a00000bf
*** NCP (IPXCP) Status ***
Local:
a0
00802d054ac4
Telebit 15/ 0
RIP/SAP
LM054AC4
Remote:
a0000083
000000000c9e
Telebit 15/ 0
None
None