Changes To Unix Clis Release 14.1; Known Problems/Limitations - Bay Networks 5399 Release Note

Changes to UNIX CLIs Release 14.1

This section describes changes to the UNIX command line interfaces for
Release 14.1 of the Remote Annex/RAC operational code.

Known Problems/Limitations

• If you are using acp logging, you need to be certain that you
have sufficient disk space available for log messages. If both
the primary and secondary acp hosts run out of disk space,
the unit will cache acp messages while it waits for space on
the host to be freed. The unit will hang if it uses all of its
storage space.
• In order to install the host tool sources for Linux and compile
successfully, a preliminary step is required if you are running
a release of Linux that includes the Linux 2.0 kernel (such as
Redhat Linux or Slackware 3.1).
Under these releases of Linux, a bug in one of the system
include files will prevent the remote access software from
compiling successfully on your host, and must be repaired
before the remote access software is installed.
To repair the file, follow these steps:
1. Edit the file /usr/include/time.h.
2. Go to line 121.
3. Change the first instance of the keyword "const" to "__const",
as it is in all the other uses of the keyword in this file.
Line 121 as shipped:
extern int nanosleep __P((const struct timespec
*__rqtp,
Line 121 after editing:
extern int nanosleep __P((__const struct timespec
*__rqtp,
4. Save the file and exit the editor.
Remote Access Software Version 5.3 Release Notes
300115-B Rev. A
75