Remote Access Software Version 5.3 Release Notes
300115-B Rev. A
64
Table 12 Disconnect Reason Descriptions (Continued)
Disconnect Reason Success Indication Explanation
pppTerm
Graceful
InactivityTimer
Forced
HangupCmd
Graceful
Last Job
Graceful
MaxLogon
Forced
SlaveNormal
Graceful
The remote side
initiated an LCP
terminate. This would
likely be due to the user
requesting a
termination of the
session.
The timer defined by
the administrator for
the net_inactivity or
inactivity_timer
parameter expired, and
the call was terminated
by the system.
The user executed the
CLI hangup command.
The timer defined by
the cli_inactivity
parameter was set to
immediate and the last
CLI job was exited.
The timer defined by
the administrator for
the max_logon
parameter expired, and
the call was terminated
by the system.
Normal disconnect
(from LAN side) when
connected to a port
from the network, i.e.
slave port.