Missing Event
Description
RING
Call aborted, "short seize".
Modem
No modem available.
assignment
CONNECT
Call aborted, "short seize".
Chat process
Modem error or hang-up.
finished
DCD
Modem did not establish a
assertion
connection with its peer.
Table 8 Event Count Discrepancy Causes
Remote Access Software Version 5.3 Release Notes
Cause
The T1/E1 is misconfigured, or the caller
hung up.
Not enough modems, or some modems have
been removed from the pool.
The T1/E1 is misconfigured, or the caller
hung up.
This may be caused by the modem.
There are many possible causes for this,
among them:
•
Modem error.
•
Bad data from a bad channel.
•
Low end-to-end line quality.
•
Noise.
•
The caller hung up.
•
The calling device wasn't a modem.
300115-B Rev. A
47