Cli Ip Host Filtering - Corrected Information - Bay Networks 5399 Release Note

Remote Access Software Version 5.3 Release Notes
300115-B Rev. A
58
Annex-Disconnect-Reason (Bay Networks VSA 46): This integer
attribute describes the composite disconnect reason reported by the unit.
Essentially, this attribute is the more important of the Annex-System-
Disconnect and Annex-Modem-Disconnect reasons. Its values are the
same as those from Annex-System-Disconnect with the addition of those
listed in Table 11.
Table 11 Unit Disconnect Reasons
Value Description
100,002 Local host disconnect
100,003 CD timer expired
100,004 Reserved
100,005 Protocol disconnect by remote modem
100,006 Long space disconnect
100,007 Carrier lost
100,008 Retrain timeout
Annex-Transmit-Speed (Bay Networks VSA 50): This integer equals
the modem transmit speed (user download speed) in b/s.
Annex-Receive-Speed (Bay Networks VSA 51): This integer equals the
modem receive speed (user upload speed) in b/s.

CLI IP Host Filtering - Corrected Information

The correct format for the values of the Bay Networks vendor-specific
RADIUS attributes Annex-Host-Restrict and Annex-Host-Allow is
a.b.c.d n,n,n-n, where a.b.c.d is the affected host's IP address and n,n,n-
n is the list of affected ports on that host. The host's IP address and the
list of ports must be separated by a single space. A "0" in any of the IP
address fields matches any host on the corresponding subnet.