Fixed (Built-In) Mics - Juniper MX5 Hardware Manual

MX5, MX10, MX40, and MX80 Universal Routing Platforms Hardware Guide
44
You can install MICs of different media types as long as the router supports those MICs.
For complete specifications, see

Fixed (Built-in) MICs

Built-in 10-Gigabit Ethernet MIC
The built-in 10-Gigabit Ethernet MIC is fixed on the MX5, MX10, MX40, and MX80 routers.
The MIC is labeled 0/MIC 0
Ethernet MIC has the following components:
Hardware features:
Four 10-Gigabit Ethernet ports labeled
High-performance throughput on each port at speeds up to 10 Gbps
Line-rate on all four 10-Gigabit Ethernet ports
LAN-PHY mode at 10.3125 Gbps
WAN-PHY mode at 9.953 Gbps
Maximum transmission units (MTUs) of up to 9192 bytes
Link LED, one green per port. For more information, see
MX10, MX40, and MX80 Front Panel" on page
Software features:
Configurable LAN-PHY and WAN-PHY mode options
Synchronous Ethernet support
Optical diagnostics and related alarms
Virtual Router Redundancy Protocol (VRRP) support
IEEE 802.1Q virtual LANs (VLANs) support
Remote monitoring (RMON) EtherStats
Source MAC learning
MAC accounting and policing—Dynamic local address learning of source MAC addresses
Flexible Ethernet encapsulation
Multiple tag protocol identifiers (TPID)
Cables and connectors:
Duplex LC/PC connector (Rx and Tx)
Fiber-optic 10-gigabit small form-factor pluggable (XFP) transceivers:
Connector: Duplex LC/PC (Rx and Tx)
10GBASE-E (model number: XFP-10G-E-OC192-IR2)
10GBASE-L (model number: XFP-10G-L-OC192-SR1)
"MICs Supported by MX Series Routers" on page
and is located on the front panel. The built-in 10-Gigabit
through , left to right.
0 3
30.
"Component LEDs on the MX5,
Copyright © 2019, Juniper Networks, Inc.
46.