Figure 18. Removing the power interposer board
2. Lift the board to remove it from the system.
Next steps
Replace the power interposer
Installing the power interposer board
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the
sled.
4.
Remove the side
cover.
Steps
1. Align the slots of the Power Interposer Board (PIB) with the fix hook on the 2U sled.
2. Using a Phillips 2 screwdriver, tighten the screws to secure the PIB on the 2U sled.
board.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
57