Table of Contents
Advertisement
3. Remove the expansion card filler bracket by sliding it out of the 2U sled.
Figure 37. Removing the expansion card filler bracket
4. There are four slots on the PCIe add-in card to install M.2 SSDs. Align the M.2 SSD with the slot on the add-in card.
5. Install the M.2 SSD into the slot on the PCIe Add-in card and press until it is latched onto by the blue clip.
NOTE:
The image shows the installation of the M.2 SSD 2280 on the PCIe AIC. There is a change in the position of the
blue latch while installing the longer M.2 SSD 22110.
Figure 38. Installing the M.2 SSD on the PCIe add-in card
6. Using both hands, insert the PCIe add-in card into the riser 1C slot till it clicks into place.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
74
Installing and removing system components
Advertisement
Table of Contents
