Table of Contents
Advertisement
Figure 68. Installing the system board
5. Using a Phillips 2 screwdriver, tighten the screws that secure the connector cover to the system board.
Figure 69. Installing the connector cover
Next steps
1. Replace the following components:
a.
Trusted platform module
NOTE:
The TPM Module must be replaced only while installing new system board.
b.
Memory modules
c.
M.2 BOSS card
d.
M.2 riser card
e.
M.2 SSD
f.
Cooling fans
98
Installing and removing system components
(TPM).
Advertisement
Table of Contents
