Figure 27. 2U sled fan cable routing
2. Pull the blue latch on the side of the fan module and lift the fan handle.
3. Lower the fan module into the cage until it is seated firmly.
NOTE:
If the airflow directional arrow is indicating outward on the fan, it indicates Reverse air-flow (RAF). If the airflow
directional arrow is indicating inward on the fan, it indicates Natural air-flow (NAF).
4. Pull down the fan handle such that it engages the guiding pin until it clicks into place.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
66
Installing and removing system components