Figure 45. Installing the Nvidia A2 GPU card on riser 1C
Installing the Nvidia A30 GPU card
Steps
1. If installed, using a Phillips 2 screwdriver, loosen the screws and remove the holder on side of the GPU card.
2. Using a Phillips 1 screwdriver, install the PCIe GPU card holder on the GPU card.
3. If installed, remove the PCIe Add-in card holder lock on the riser 1C card and reinstate the card holder lock to install a full
length card.
Figure 46. Removing the PCIe Add-in card holder lock
4. Remove two filler brackets by sliding them out of the sled one after the other to accommodate the GPU card.
Installing and removing system components
79