Table of Contents
Advertisement
Figure 43. Installing the PCIe card holder locks on riser 1C
3. Remove the expansion card filler bracket by sliding it out of the 2U sled.
Figure 44. Removing the expansion card filler bracket
4. Align the GPU card with the riser 1C slot and push it towards the slot till it locks into place.
5. Close the blue card holder latch to secure the GPU card on riser 1C.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
78
Installing and removing system components
Advertisement
Table of Contents
