Figure 12: Chassis Status Leds On A Ptx1000; Table 10: Ptx1000 Chassis Status Leds - Juniper PTX1000 Hardware Manual

Table 10: PTX1000 Chassis Status LEDs

Name Color
Power Unlit
( PWR )
Green
Amber
Status ( STS ) Unlit
LED
Green
Amber
Major alarm Unlit
( MAJ ) LED
Red
Minor alarm Unlit
( ) LED
MIN
Amber
Copyright © 2018, Juniper Networks, Inc.

Figure 12: Chassis Status LEDs on a PTX1000

1— Power ( PWR ) LED
2— Major alarm ( MAJ ) LED
Table 10 on page 33 describes the chassis status LEDs on a PTX1000.
State
Off
On steadily
Blinking
Off
On steadily
Blinking
Off
On steadily
Off
On steadily
3— Minor alarm (
4— Status (
Description
The PTX1000 is powered off— there is no power to the device.
The power system is working correctly.
There is a problem with the power system. Power off the PTX1000
by setting the AC power source outlet to the off (
unplugging the AC power cords. Correct any voltage issues. Power
on the PTX1000 and monitor the power supply and fan LEDs to help
determine where the error is occurring. If there is a CPU power failure,
the PTX1000 does not boot.
The PTX1000 is powered off or Junos OS is halted.
Junos OS has booted.
The PTX1000 detects a fault.
There are no major alarms.
A major hardware fault has occurred, such as a temperature alarm
or power failure, and the PTX1000 has halted.
There are no minor alarms.
A minor alarm has occurred, such as a software error.
Chapter 1: Overview
MIN ) LED
STS ) LED
) position or by
O
33