Packing A Ptx1000 For Shipping; Packing Ptx1000 Components For Shipping - Juniper PTX1000 Hardware Manual

PTX1000 Packet Transport Router Hardware Guide
108
ESD grounding strap.
Antistatic bag, one for each component.
If you are returning the chassis, an appropriate screwdriver for the mounting screws
used on your rack.
Packing a PTX1000 for Shipping on page 108
Packing PTX1000 Components for Shipping on page 108

Packing a PTX1000 for Shipping

To pack a PTX1000 for shipping:
Power off the PTX1000 and remove the AC power cords or DC power cables. See
1.
"Powering Off the PTX1000" on page
Remove the cables that connect the PTX1000 to all external devices. See
2.
"Disconnecting a Fiber-Optic Cable from the PTX1000" on page
Remove all field-replaceable units (FRUs) from the router. See:
3.
Removing a Fan Module from the PTX1000 on page 87
Removing a Power Supply from the PTX1000 on page 90
Remove the PTX1000 from the rack. See
4.
Place the PTX1000 in an antistatic bag.
5.
Place the PTX1000 in the shipping carton.
6.
Place the packing foam on top of and around the PTX1000.
7.
If you are returning accessories or FRUs with the PTX1000, pack them as instructed
8.
in "Packing PTX1000 Components for Shipping" on page
Close the top of the cardboard shipping box and seal it with packing tape.
9.
Write the return materials authorization (RMA) number on the exterior of the box to
10.
ensure proper tracking. See
Authorization" on page 106

Packing PTX1000 Components for Shipping

CAUTION: Do not stack PTX1000 components. Return individual components
in separate boxes if they do not fit together on one level in the shipping box.
84.
"Uninstalling the PTX1000" on page
"Contacting Customer Support to Obtain Return Material
for instructions on obtaining an RMA number.
Copyright © 2018, Juniper Networks, Inc.
96.
99.
108.