Table of Contents
Advertisement
2. Configure the IP address and prefix length for the router management interface.
[edit]
root@# set interfaces re0:mgmt-0 unit 0 family inet address ip-address/prefix-length
CAUTION:
interfaces within the same subnet, only one interface is usable and supported.
NOTE:
The management ports, em0 or re0:mgmt-0 (MGMT for RJ-45 connections) and
em1 (also labeled MGMT for fiber connections), are found on the front of the RCBs of the
PTX10004 router.
Configure Optional Routes, Services, and Commit the Configuration
1. (Optional) Configure the static routes to remote prefixes with access to the management port.
[edit]
root@# set routing-options static route remote-prefix next-hop destination-ip retain no-readvertise
2. Enable services such as SSH and Telnet.
NOTE:
You will not be able to log in to the router as the root user through Telnet. Root login
is allowed only through SSH.
[edit]
root@# set system services telnet
3. Commit the configuration to activate it on the router.
[edit]
root@# commit
Although the CLI permits you to configure two management Ethernet
157
Advertisement
Table of Contents
