PTX10004 Cooling System
IN THIS SECTION
PTX10004 Cooling System and Airflow | 40
PTX10004 Fan Tray LEDs and Fan Tray Controller LEDs | 47
The PTX10004 cooling system components work together to keep all components within the acceptable
temperature range. If the maximum temperature specification is exceeded and the system cannot be
adequately cooled, the Routing and Control Board (RCB) shuts down some or all of the hardware
components.
PTX10004 Cooling System and Airflow
IN THIS SECTION
Fan Tray | 40
Fan Tray Controller | 42
Airflow Direction in the PTX10004 | 46
The cooling system in a PTX10004 chassis consists of dual fan trays (JNP10004-FAN2) with matching
dual fan tray controllers (JNP10004-FTC2). Each fan tray requires a companion fan tray controller to be
installed and operational to be hot-insertable and hot-removable.
Fan Tray
The JNP10004-FAN2 fan tray contains an array of internal fans, a non-removable control board, and LEDs.
The two fan trays install vertically, side by side, next to the power supplies on the FRU side of the chassis.
Two handles on each front faceplate facilitate handling of the fan tray. See
Figure 14 on page
41.
Figure 13 on page 41
and
40