Fig 6-48 Front Gear Kit; Rrp 6-58 Front Gear Kit (Pl 20.11) - Xerox DOCUPRINT N4525 Service Quick Reference Manual

RRP 6-58 Front Gear Kit (PL 20.11)

Fig 6-48 Front Gear Kit

Removal
1.
Remove the Jogging Cover (RRP 6-14).
2.
Remove the Top Cover, Front (RRP 6-16).
3.
Remove the Front Cover-Open Front Cover and Kit Stud Cover (RRP 6-17).
4.
Unclamp the harness of the Clamp (PL 20.11.35).
In the following procedure the bearing is not secure. Use care not
Note
to lose the bearing.
5.
Remove two screws that secure to the Finisher from the Bracket (PL 20.11.34),
and pull off the Bracket together with the Bearing (PL 20.11.33), Clamp (PL
20.11.35) and Kit Gear Front toward the front.
6.
Remove the E-ring that secures the Pully/Gear (PL 20.11.32) to the Bracket
(PL 20.11.34), and remove the Pully/Gear.
Replacement
1.
Reverse the above procedure.
S4525-479
Volume 6 / Finisher - RRPs 6-775